Projet de travail approuvé
ϲʿ/AWI 16890-5
Filtres à air de ventilation générale — Partie 5: Mesurage de l'efficacité fractionnelle et de la résistance à l'écoulement de l'air pour les médias filtrant plans
Numéro de référence
ϲʿ/AWI 16890-5
Edition 1
Projet de travail approuvé
ϲʿ/AWI 16890-5
88316
Un groupe de travail a préparé un projet.

éܳé

This part of ϲʿ 16890 specifies the aerosol production, the test equipment and the test methods used for measuring fractional efficiency and air flow resistance of flat sheet media used in air filters for general ventilation. It is intended for use in conjunction with ϲʿ 16890- 1, ϲʿ 16890- 2, ϲʿ 16890- 3 and ϲʿ 16890- 4. The test method described in this part of ϲʿ 16890 is applicable only for air velocities between 0,05 m/s (10 ft/min) and 0,67 m/s (133 ft/min), referring to a test rig with a minimum nominal face area of 0,09 m2 (1 ft2). ϲʿ 16890 (all parts) refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested as per the procedures defined within ϲʿ 16890 (all parts). This part of the standard is limited to the media used in these filter elements. Air filter media outside of this scope are evaluated by other applicable test methods, (see ϲʿ 29463-3). The performance results obtained in accordance with ϲʿ 16890 (all parts) cannot by themselves be quantitatively applied to predict performance in service with regard to efficiency and lifetime. The results of this test should not be assumed to predict filter performance based on the media flat sheet testing.

Informations générales

  •  : Projet
    : Nouveau projet enregistré au programme de travail du TC/SC [20.00]
  •  : 1
  • ϲʿ/TC 142
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance

Service à la clientèle
+41 22 749 08 88

Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)