International Standard
ϲʿ 16890-3:2024
Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
Reference number
ϲʿ 16890-3:2024
Edition 2
2024-08
Preview
ϲʿ 16890-3:2024
83047
No disponible en 貹ñDZ
Publicado (徱ó 2, 2024)

ϲʿ 16890-3:2024

ϲʿ 16890-3:2024
83047
Idioma
Formato
CHF 129
Convertir Franco suizo (CHF) a

Resumen

This document specifies the test equipment and the test methods used for measuring the gravimetric efficiency and resistance to air flow of air filter for general ventilation.

It is intended for use in conjunction with ϲʿ 16890-1, ϲʿ 16890-2 and ϲʿ 16890-4.

The test method described in this document is applicable for air flow rates between 0,25 m3/s (900 m3/h, 530 ft3/min) and 1,5 m3/s (5 400 m3/h, 3 178 ft3/min), referring to a test rig with a nominal face area of 610 mm × 610 mm (24 in × 24 in).

This document refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested as per the procedures defined in the ϲʿ 16890 series.

NOTE The lower limit for this test procedure is set at a minimum ePM10 efficiency of 20 % since it is very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.

This document does not apply to filter elements used in portable room-air cleaners.

Informaciones generales

  •  : Publicado
     : 2024-08
    : Norma Internacional publicada [60.60]
  •  : 2
     : 22
  • ϲʿ/TC 142
    91.140.30 
  • RSS actualizaciones

¿Tiene alguna duda?

Consulte nuestras Ayuda y asistencia

Atención al cliente
+41 22 749 08 88

Horario de asistencia:
De lunes a viernes - 09:00-12:00, 14:00-17:00 (UTC+1)