Publicly Available Specification
Ïã¸ÛÁùºÏ²Ê¿ª½±/PAS 22101-3:2024
Polyethylene reinforced with short glass fibres (PE-sGF) piping systems for industrial applications — Part 3: Fittings
Reference number
Ïã¸ÛÁùºÏ²Ê¿ª½±/PAS 22101-3:2024
Edition 1
2024-07
Publicly Available Specification
Read sample
Ïã¸ÛÁùºÏ²Ê¿ª½±/PAS 22101-3:2024
85318
Published (Edition 1, 2024)

Ïã¸ÛÁùºÏ²Ê¿ª½±/PAS 22101-3:2024

Ïã¸ÛÁùºÏ²Ê¿ª½±/PAS 22101-3:2024
85318
Language
Format
CHF 129
Convert Swiss francs (CHF) to

Abstract

This document specifies the fittings made from short glass fibre reinforced polyethylene (PE-sGF) manufactured by the spiral cross winding method used below ground for the conveyance of fluids in the following industrial and agricultural contexts:

—ÌýÌýÌýÌý chemical plants;

—ÌýÌýÌýÌý industrial sewerage engineering;

—ÌýÌýÌýÌý power engineering (cooling and general-purpose water supply);

—ÌýÌýÌýÌý agricultural production plants;

—ÌýÌýÌýÌý water treatment;

—ÌýÌýÌýÌý small hydraulic power plants (general-purpose water supply).

This document also specifies the test parameters for the test methods it references.

In conjunction with the other parts of the Ïã¸ÛÁùºÏ²Ê¿ª½±Ìý 22101Ìýseries, this document is applicable to PE-sGF fittings, and to joints with components of PE-sGF or other materials, intended to be used under the following conditions:

a)ÌýÌýÌýÌýÌýÌý a maximum allowable operating pressure (PFA) up to and including 25Ìýbar;1)

b)ÌýÌýÌýÌýÌýÌý an operating temperature of 20Ìý°C as the reference temperature.

NOTE 1ÌýÌýÌýÌýÌýÌýÌý For other operating temperatures, guidance is given in Ïã¸ÛÁùºÏ²Ê¿ª½±/PAS 22101-1:2022, AnnexÌýA.

This document covers a range of maximum allowable operating pressures and gives requirements concerning colours and additives.

NOTE 2ÌýÌýÌýÌýÌýÌýÌý It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.

This document is applicable to fittings of the following types:

—ÌýÌýÌýÌý electrofusion socket fittings;

—ÌýÌýÌýÌý loose backing flanges and flange adapters;

—ÌýÌýÌýÌý fabricated fittings (see AnnexÌýA).

1)Ìý 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

General information

Got a question?

Check out our Help and Support

Check out our FAQs

Customer care
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)