Ïã¸ÛÁùºÏ²Ê¿ª½±

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of:

—ÌýÌýÌý milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2);

—ÌýÌýÌý machining centres; and

—ÌýÌýÌý transfer machines (see 3.1.3)

designed for continuous production use, which are intended to cut cold metal and other non-combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in Ïã¸ÛÁùºÏ²Ê¿ª½±Ìý19085‑1 and glass, stone and engineered/agglomerated materials as defined in ENÌý14618.

This document covers the following machines (referred to as "machines" in this document):

a)ÌýÌýÌý manually, without numerical control, operated boring and milling machines (see 3.2.1, GroupÌý1), e.g. knee and column type milling machines (see FiguresÌýC.1 and C.2);

b)ÌýÌýÌý manually, with limited numerical control, operated boring and milling machines (see 3.2.2, GroupÌý2), e.g. profile and contouring milling machines (see FiguresÌýC.3 and C.4);

c)ÌýÌýÌýÌý numerically controlled milling machines and machining centres (see 3.2.3, GroupÌý3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see FiguresÌýC.5 to C.7);

d)ÌýÌýÌý transfer and special-purpose machines (see 3.2.4, GroupÌý4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see FiguresÌýC.8 to C.13).

e)ÌýÌýÌý machines fitted with the following devices/facilities, whose hazards have been dealt with:

—ÌýÌýÌý tool magazine(s);

—ÌýÌýÌý tool changer(s);

—ÌýÌýÌý workpiece handling mechanism(s);

—ÌýÌýÌý powered workpiece clamping mechanism(s);

—ÌýÌýÌý swarf/chip conveyor(s);

—ÌýÌýÌý power-operated door(s);

—ÌýÌýÌý moveable operator cabin(s);

—ÌýÌýÌý additional equipment for turning;

—ÌýÌýÌý additional equipment for grinding.

This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to Ïã¸ÛÁùºÏ²Ê¿ª½±Ìý12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see ClauseÌý4).

This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.