Abstract
This document specifies the characteristics of, and corresponding test methods for bio-stable ceramic-bone-substitute material based on a zirconia-reinforced, high-purity alumina matrix composite for use as bone spacers, bone replacements and components in orthopaedic joint prostheses.
This document is intended for composite materials which are based on an alumina matrix, i.e. alumina as the dominating phase in the composite with a mass fraction of >60 %, similar to the material described in Ïã¸ÛÁùºÏ²Ê¿ª½± 6474‑1, but extended by means of a certain amount of zirconia and other defined ingredients.
NOTE The required properties in this document differ from those in Ïã¸ÛÁùºÏ²Ê¿ª½± 6474‑1 with respect to strength and fracture toughness. Furthermore, there are requirements specifically applicable for zirconia-containing materials (see Ïã¸ÛÁùºÏ²Ê¿ª½± 13356).
In the material composition as defined in this document, additional additives are listed. Typical additives for alumina or zirconia ceramics are Mg, Y, Ce and others. Such additives can be useful in order to improve the mechanical properties and/or the chemical stability of the alumina-zirconia composite material.
This document does not cover biocompatibility (see Ïã¸ÛÁùºÏ²Ê¿ª½± 10993‑1). It is the responsibility of the manufacturer to evaluate the biocompatibility of the specific ceramic composite material which is produced within the framework of this document.
General information
-
Status: PublishedPublication date: 2019-03Stage: International Standard to be revised [90.92]
-
Edition: 2Number of pages: 12
-
Technical Committee :Ïã¸ÛÁùºÏ²Ê¿ª½±/TC 150/SC 1ICS :11.040.40
- RSS updates
Life cycle
-
Previously
WithdrawnÏã¸ÛÁùºÏ²Ê¿ª½± 6474-2:2012
-
Now
PublishedÏã¸ÛÁùºÏ²Ê¿ª½± 6474-2:2019
A standard is reviewed every 5 years
Stage: 90.92 (To be revised) -
Will be replaced by
Under developmentÏã¸ÛÁùºÏ²Ê¿ª½±/AWI 6474-2
Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)