International Standard
ϲʿ 32543-1:2024
Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method
Reference number
ϲʿ 32543-1:2024
Edition 1
2024-05
Preview
ϲʿ 32543-1:2024
84754
недоступно на русском языке
Опубликовано (Версия 1, 2024)

ϲʿ 32543-1:2024

ϲʿ 32543-1:2024
84754
Язык
Формат
CHF 96
Пересчитать швейцарские франки (CHF) в

Тезис

This document specifies a method for the measurement of effective focal spot dimensions above 0,1 mm of X-ray systems up to and including 1 000 kV X-ray voltage by means of the pinhole camera method with digital evaluation. The tube voltage applied for this measurement is restricted to 200 kV for visual film evaluation and can be selected higher than 200 kV if digital detectors are used.

The imaging quality and the resolution of X-ray images depend highly on the characteristics of the effective focal spot, in particular the size and the two-dimensional intensity distribution as seen from the detector plane. Compared to the other methods specified in the EN 12543 series and the ϲʿ 32543 series, this method allows to obtain an image of the focal spot and to see the state of it (e.g. cratering of the anode).

This test method provides instructions for determining the effective size (dimensions) of standard (macro focal spots) and mini focal spots of industrial X-ray tubes. This determination is based on the measurement of an image of a focal spot that has been radiographically recorded with a “pinhole” technique and evaluated with a digital method.

For the characterization of commercial X-ray tube types (i.e. for advertising or trade), the specific FS (focal spot) values of Annex A can be used.

Общая информация

  •  : Опубликовано
     : 2024-05
    : Опубликование международного стандарта [60.60]
  •  : 1
  • ϲʿ/TC 135/SC 5
    19.100 
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)