International Standard
ϲʿ 4437-2:2024
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
Reference number
ϲʿ 4437-2:2024
Edition 2
2024-02
Preview
ϲʿ 4437-2:2024
79722
недоступно на русском языке
Опубликовано (Версия 2, 2024)

ϲʿ 4437-2:2024

ϲʿ 4437-2:2024
79722
Язык
Формат
CHF 129
Пересчитать швейцарские франки (CHF) в

Тезис

This document specifies the characteristics of pipes made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels.

It also specifies the test parameters for the test methods referred to in this document.

In conjunction with ϲʿ4437-1, ϲʿ4437-3, ϲʿ4437-4 and ϲʿ4437-5, this document is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions:

a) a maximum operating pressure (MOP), up to and including 10bar[1], at a reference temperature of 20°C for design purposes;

b) an operating temperature between −20°C and 40°C.

For operating temperatures between 20°C and 40°C, derating coefficients are defined in ϲʿ4437-5.

The ϲʿ 4437 series covers a range of MOPs and gives requirements concerning colours.

This document is applicable to three types of pipes:

PE pipes (outside diameter, dn) including any identification stripes;

PE pipes with co-extruded layers on either or both the outside and/or inside of the pipe (total outside diameter, dn) as specified in AnnexA, where all PE layers have the same MRS rating;

PE pipes (outside diameter, dn) with a peelable and contiguous thermoplastics additional layer on the outside of the pipe ("coated pipe") as specified in AnnexB.

It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.

[1] 1 bar = 0,1MPa = 105 Pa; 1MPa = 1N/mm2.

Общая информация

  •  : Опубликовано
     : 2024-02
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 2
  • ϲʿ/TC 138/SC 4
    75.200  83.140.30 
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)