Тезис
This document specifies the characteristics of valves made from unplasticized polyamide (PA-U) in accordance with ϲʿ16486-1, intended to be buried and used for the supply of gaseous fuels.
It is applicable to isolating unidirectional and bi-directional valves with spigot ends or electrofusion sockets intended to be fused with PA-U pipes or fittings conforming to ϲʿ16486-2 and ϲʿ16486-3 respectively.
Valves made from material other than unplasticized polyamide designed for the supply of gaseous fuels conforming to the relevant standards are permitted to be used in PA-U piping systems according to the ϲʿ16486series provided they have relevant PA-U connections for butt fusion or electrofusion ends (see ϲʿ16486-3). The component, i.e. the complete valve, is required to fulfil the requirements of this document.
This document also specifies the test parameters for the test methods it describes.
In conjunction with ϲʿ 16486-1, ϲʿ 16486-2, ϲʿ 16486-3 and ϲʿ 16486-5, this document is applicable to PA-U valves and their joints and to joints with components of PA-U and other materials intended to be used under the following conditions:
a) a maximum operating pressure (MOP) of up to and including 18bar[1], or limited to 16bar under regional CEN requirements, at a reference temperature of 20°C for design purposes;
NOTE1 For the purpose of this document and the references to ϲʿ8233, MOP is considered to be nominal pressure.
b) an operating temperature of −20°C to 40°C;
NOTE2 For operating temperatures between 20°C and 40°C, derating coefficients are specified in ϲʿ16486-5.
This document covers valves for pipes with a nominal outside diameter, dn, ≤ 400mm.
[1] 1bar = 0,1MPa = 105 Pa; 1MPa = 1N/mm².
Общая информация
-
Текущий статус: ОпубликованоДата публикации: 2022-01Этап: Международный стандарт подлежит пересмотру [90.92]
-
Версия: 2
-
Технический комитет :ϲʿ/TC 138/SC 7
- RSS&Բ;обновления
Новая версия в процессе разработки
ϲʿ/DIS 16486-4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing
Part 4: Valves
ϲʿ/DIS 16486-4
Жизненный цикл
-
Ранее
Отозваноϲʿ 16486-4:2016
-
Сейчас
Опубликованоϲʿ 16486-4:2022
Стандарт, который пересматривается каждые 5 лет
Этап: 90.92 (Будет пересмотрено)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
-
Будет заменено
В стадии разработкиϲʿ/DIS 16486-4
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)