Reference number
ϲʿ 16486-4:2022
International Standard
ϲʿ 16486-4:2022
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
Edition 2
2022-01
Preview
ϲʿ 16486-4:2022
78883
недоступно на русском языке
Опубликовано (Версия 2, 2022)

ϲʿ 16486-4:2022

ϲʿ 16486-4:2022
78883
Язык
Формат
CHF 129
Пересчитать швейцарские франки (CHF) в

Тезис

This document specifies the characteristics of valves made from unplasticized polyamide (PA-U) in accordance with ϲʿ16486-1, intended to be buried and used for the supply of gaseous fuels.

It is applicable to isolating unidirectional and bi-directional valves with spigot ends or electrofusion sockets intended to be fused with PA-U pipes or fittings conforming to ϲʿ16486-2 and ϲʿ16486-3 respectively.

Valves made from material other than unplasticized polyamide designed for the supply of gaseous fuels conforming to the relevant standards are permitted to be used in PA-U piping systems according to the ϲʿ16486series provided they have relevant PA-U connections for butt fusion or electrofusion ends (see ϲʿ16486-3). The component, i.e. the complete valve, is required to fulfil the requirements of this document.

This document also specifies the test parameters for the test methods it describes.

In conjunction with ϲʿ 16486-1, ϲʿ 16486-2, ϲʿ 16486-3 and ϲʿ 16486-5, this document is applicable to PA-U valves and their joints and to joints with components of PA-U and other materials intended to be used under the following conditions:

a) a maximum operating pressure (MOP) of up to and including 18bar[1], or limited to 16bar under regional CEN requirements, at a reference temperature of 20°C for design purposes;

NOTE1 For the purpose of this document and the references to ϲʿ8233, MOP is considered to be nominal pressure.

b) an operating temperature of −20°C to 40°C;

NOTE2 For operating temperatures between 20°C and 40°C, derating coefficients are specified in ϲʿ16486-5.

This document covers valves for pipes with a nominal outside diameter, dn, ≤ 400mm.

[1] 1bar = 0,1MPa = 105 Pa; 1MPa = 1N/mm².

Общая информация

  •  : Опубликовано
     : 2022-01
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 2
  • ϲʿ/TC 138/SC 7
    75.200  83.140.30 
  • RSS&Բ;обновления

Новая версия в процессе разработки

Draft
International Standard
ϲʿ/DIS 16486-4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
Reference number
ϲʿ/DIS 16486-4
Edition 1
Проект Международный стандарт

ϲʿ/DIS 16486-4

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing

Part 4: Valves

ϲʿ/DIS 16486-4

ϲʿ/DIS 16486-4
87593
Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)