International Standard
ϲʿ 29461-3:2024
Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements
Reference number
ϲʿ 29461-3:2024
Edition 1
2024-07
Preview
ϲʿ 29461-3:2024
74696
недоступно на русском языке
Опубликовано (Версия 1, 2024)

ϲʿ 29461-3:2024

ϲʿ 29461-3:2024
74696
Язык
Формат
CHF 129
Пересчитать швейцарские франки (CHF) в

Тезис

This document specifies methods to determine the mechanical integrity of filters under defined conditions that can be encountered in abnormal operating environments. It describes the test methods for filter elements, independent of any ageing procedures like pulsing, loading, temperature cycles, wet conditions or others.

The test procedure is intended for filters operating in the range of 0,24 m3/s (850 m3/h) up to 2,36 m3/s (8 500 m3/h). Filter elements with a lower efficiency than ϲʿ T5 (ePM10) according to ϲʿ 29461-1 are excluded.

To ensure the comparability of the test results, only new filter elements or those loaded up to 625 Pa or maximum 800 Pa according to ϲʿ 29461-1 are tested.

This document does not describe a standardized method to measure the fractional or gravimetric efficiency. The efficiency of the filter element can be tested according to ϲʿ 29461-1.

The performance results obtained according to this document cannot be quantitatively applied (by themselves) to predict performance in real use.

Общая информация

  •  : Опубликовано
     : 2024-07
    : Опубликование международного стандарта [60.60]
  •  : 1
  • ϲʿ/TC 142
    29.160.99 
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)