Reference number
ϲʿ 6721-2:2019
International Standard
ϲʿ 6721-2:2019
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
Edition 3
2019-04
Preview
ϲʿ 6721-2:2019
73143
недоступно на русском языке
Опубликовано (Версия 3, 2019)
Последний раз этот публикация был пересмотрен в  2024. Поэтому данная версия остается актуальной.

ϲʿ 6721-2:2019

ϲʿ 6721-2:2019
73143
Язык
Формат
CHF 96
Пересчитать швейцарские франки (CHF) в

Тезис

This document specifies two methods (A and B) for determining the linear dynamic mechanical properties of plastics, i.e. the storage and loss components of the torsional modulus, as a function of temperature, for small deformations within the frequency range from 0,1 Hz to 10 Hz.

NOTE The temperature dependence of these properties, measured over a sufficiently broad range of temperatures (for example from −50 °C to +150 °C for most commercially available plastics), gives information on the transition regions (for example the glass transition and the melting transition) of the polymer. It also provides information concerning the onset of plastic flow.

The two methods described are not applicable to non-symmetrical laminates (see ϲʿ 6721-3). The methods are not suitable for testing rubbers, for which the user is referred to ϲʿ 4664-2.

Общая информация

  •  : Опубликовано
     : 2019-04
    : Подтверждение действия международного стандарта [90.93]
  •  : 3
  • ϲʿ/TC 61/SC 5
    83.080.01 
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)