Reference number
ϲʿ/TR 21704:2017
Technical Report
ϲʿ/TR 21704:2017
Toughness of round steel link chains — Test with sub-size specimens
Edition 1
2017-03
Technical Report
Preview
ϲʿ/TR 21704:2017
71367
недоступно на русском языке
Опубликовано (Версия 1, 2017)

ϲʿ/TR 21704:2017

ϲʿ/TR 21704:2017
71367
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в

Тезис

ϲʿ/TR 21704:2017 contains investigations and investigation results on toughness of round steel link chains, tested with sub-size specimens.

It applies to round steel link chains for hand operated chain hoists of grade TH and VH and for sling chains used for chain slings of grade 8.

NOTE 1 Associated International Standards are ϲʿ 16877, ϲʿ 16872 and ϲʿ 3076. In future it is intended to implement the results on toughness derived in this document in new standards.

Eleven steels, provided by four manufacturers, were tested to find a test regime on sub-size specimens and requirements on the notch impact toughness values at design temperature which resulted out of the tests. These requirements are adjusted to the toughness values of full size ϲʿ-V specimens.

NOTE 2 The requirements are also valid for other cross sections of the chain than round.

Общая информация

  •  : Опубликовано
     : 2017-03
    : Опубликование международного стандарта [60.60]
  •  : 1
  • ϲʿ/TC 111/SC 1
    53.020.30 
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)