Reference number
ϲʿ 15653:2018
International Standard
ϲʿ 15653:2018
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
Edition 2
2018-01
Preview
ϲʿ 15653:2018
70865
недоступно на русском языке
Опубликовано (Версия 2, 2018)
Последний раз этот публикация был пересмотрен в  2023. Поэтому данная версия остается актуальной.

ϲʿ 15653:2018

ϲʿ 15653:2018
70865
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в

Тезис

ϲʿ 15653:2018 specifies methods for determining fracture toughness in terms of stress intensity factor (K), crack tip opening displacement or CTOD (δ) and experimental equivalent of the J-integral for welds in metallic materials (J).

ϲʿ 15653:2018 complements ϲʿ 12135, which covers all aspects of fracture toughness testing of parent metal and which needs to be used in conjunction with this document. This document describes methods for determining point values of fracture toughness. It should not be considered a way of obtaining a valid R-curve (resistance-to-crack-extension curve). However, the specimen preparation methods described in this document could be usefully employed when determining R-curves for welds. The methods use fatigue precracked specimens which have been notched, after welding, in a specific target area in the weld. Methods are described to evaluate the suitability of a weld for notch placement within the target area, which is either within the weld metal or within the weld heat-affected zone (HAZ), and then, where appropriate, to evaluate the effectiveness of the fatigue crack in sampling these areas.

Общая информация

  •  : Опубликовано
     : 2018-01
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 2
  • ϲʿ/TC 164/SC 4
    25.160.40 
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)