Reference number
ϲʿ 294-1:2017
International Standard
ϲʿ 294-1:2017
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Edition 2
2017-05
Preview
ϲʿ 294-1:2017
67036
недоступно на русском языке
Опубликовано (Версия 2, 2017)
Последний раз этот публикация был пересмотрен в  2022. Поэтому данная версия остается актуальной.

ϲʿ 294-1:2017

ϲʿ 294-1:2017
67036
Язык
Формат
CHF 151
Пересчитать швейцарские франки (CHF) в

Тезис

ϲʿ 294-1:2017 specifies the general principles to be followed when injection moulding test specimens of thermoplastic materials and gives details of mould designs for preparing two types of specimen for use in acquiring reference data, i.e. type A1 and type B1 test specimens as specified in ϲʿ 20753, and provides a basis for establishing reproducible moulding conditions. Its purpose is to provide consistent descriptions of the main parameters of the moulding process and to establish a uniform practice in reporting moulding conditions. The particular conditions required for the reproducible preparation of test specimens will vary for each material used and are given in the International Standard for the relevant material or are to be agreed upon between the interested parties.

NOTE Interlaboratory tests with acrylonitrile/butadiene/styrene (ABS), styrene/butadiene (SB) and poly(methyl methacrylate) (PMMA) have shown that mould design is an important factor in the reproducible preparation of test specimens.

Общая информация

  •  : Опубликовано
     : 2017-05
    : Подтверждение действия международного стандарта [90.93]
  •  : 2
  • ϲʿ/TC 61/SC 9
    83.080.20 
  • RSS&Բ;обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)