Reference number
ϲʿ 6142-1:2015
International Standard
ϲʿ 6142-1:2015
Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures
Edition 1
2015-08
Preview
ϲʿ 6142-1:2015
59631
недоступно на русском языке
Опубликовано (Версия 1, 2015)
Последний раз этот публикация был пересмотрен в  2020. Поэтому данная версия остается актуальной.
В данный стандарт внесены 1&Բ;поправка.

ϲʿ 6142-1:2015

ϲʿ 6142-1:2015
59631
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в

Тезис

ϲʿ 6142-1:2015 specifies a gravimetric method for the preparation of calibration gas mixtures in cylinders with traceable values for the amount-of-substance fraction (amount fraction) of one or more components. This part of ϲʿ 6142 describes a method for calculating the uncertainty associated with the amount fraction of each component. This uncertainty calculation requires the evaluation of the contributions to the uncertainty due to factors including the weighing process, the purity of the components, the stability of the mixture, and the verification of the final mixture.

ϲʿ 6142-1:2015 is only applicable to mixtures of gaseous or totally vaporized components, which may be introduced into the cylinder in the gaseous or liquid state. Both binary and multi-component gas mixtures (including natural-gas type mixtures) are covered by this part of ϲʿ 6142. Methods for the batch production of more than one mixture in a single process are not included in this part of ϲʿ 6142.

ϲʿ 6142-1:2015 requires estimation of the stability of the mixture for its intended life time (maximum storage life), but it is not for use with components that react with each other unintentionally. This part of ϲʿ 6142 also requires the impurities in each parent gas or liquid used in the preparation of the mixture to be assessed and quantified.

Общая информация

  •  : Опубликовано
     : 2015-08
    : Подтверждение действия международного стандарта [90.93]
  •  : 1
  • ϲʿ/TC 158
    71.040.40 
  • RSS&Բ;обновления

&Բ;Изменения

Поправки принимаются, когда обнаруживается, что в существующий документ по стандартизации необходимо добавить новый материал. В них также могут быть включены редакционные или технические исправления, которые необходимо внести в существующий документ.

Amendment 1

Corrections to formulae in Annex E and Annex G

Версия 2020

ϲʿ 6142-1:2015/Amd 1:2020
81078
Язык
Формат
CHF 18
Пересчитать швейцарские франки (CHF) в

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)