Reference number
ϲʿ 9327-4:1999
International Standard
ϲʿ 9327-4:1999
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength
Edition 1
1999-06
Preview
ϲʿ 9327-4:1999
16997
недоступно на русском языке
Опубликовано (Версия 1, 1999)
Последний раз этот публикация был пересмотрен в  2013. Поэтому данная версия остается актуальной.

ϲʿ 9327-4:1999

ϲʿ 9327-4:1999
16997
Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в

Тезис

1.1 This part of ϲʿ 9327 applies to forgings and rolled or forged bars in thicknesses up to 250 mm manufactured

from fine grain steels (see NOTE) given in Table 1 and to be delivered according to the specifications given in

ϲʿ 9327-1.

The steels are classified into

room temperature grades (P...),

elevated temperature grades (PH...),

low temperature grades (PL...),

low and elevated temperature grades (PLH...).

NOTE Fine grain steels are here understood as steels with grain size 6 or finer according to the grain size charts in

ϲʿ 643.

1.2 This part of ϲʿ 9327 covers the following data:

a) In Table 1 the limits for

the chemical composition according to the cast analysis;

the tensile properties at room temperature;

the indications on the usual heat treatment condition at the time of delivery;

b) in Table 2 the permissible product analysis tolerances on the limiting values given for the cast analysis;

c) in Table 3 the minimum impact energy values;

d) in Table 4 the minimum elevated temperature proof strength values.

Общая информация

  •  : Опубликовано
     : 1999-06
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 1
  • ϲʿ/TC 17/SC 10
  • RSS&Բ;обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)